Need help?Do you have a question about the Salton SHH30 and is the answer not in the manual?
General| Power | 1500 W |
|---|---|
| Voltage | 120 V |
| Overheat Protection | Yes |
| Adjustable Thermostat | Yes |
| Fan Function | Yes |
| Remote Control | No |
| Timer | No |
| Heat Settings | 2 |
Please read the instructions carefully before using any appliance.
Ensure the voltage on the rating label corresponds to your home's mains voltage.
Incorrect operation or improper use can damage the appliance and cause injury.
The appliance is intended for household use only; commercial use invalidates warranty.
Close supervision is required when the appliance is used near children or invalids.
Check the power cord and plug regularly for damage; replace if damaged to avoid hazards.
Do not use the appliance if dropped or damaged; take for authorized repair.
Do not immerse motor assembly, plug, or cord in water or other liquids.
Never immerse the unit in water for cleaning purposes.
Remove the plug by gripping it, not the cord. Always unplug when not in use.
Use of non-recommended accessories may result in injuries, fire, or electric shock.
A short cord reduces entanglement and tripping hazards.
Do not let the cord hang over edges or be pulled inadvertently.
Do not allow cord to touch hot surfaces or place near burners/ovens.
Do not use on cooking tops or near open flames.
Use of extension cords is not recommended; ensure suitability if used.
This appliance is not suitable for outdoor use or purposes other than intended.
DO NOT carry the appliance by the power cord.
Do not leave the appliance unattended during use. Always unplug when not in use.
Always operate the appliance on a smooth, even, stable surface.
Ensure that the switch is in the “Off” position after each use.
Manufacturer not responsible for damage/injury from improper use or unauthorized repairs.
In case of technical problems, switch off and return to authorized service facility.
Only fill the water tray with water; do not use any other liquid.
DO NOT COVER THE APPLIANCE.
Place the heater on a stable floor surface, away from flammable materials.
Plug the heater into the wall socket and switch on the wall socket.
Use the two switches to control the silica bars (one, two, or three bars).
The fan automatically switches on with two or three bars and off when switched off.
This appliance is for household use only and is not user-serviceable.
Do not open or change parts yourself; refer to service or supplier.
Always unplug the unit and ensure the switch is 'Off' before cleaning.
Always wait for the heater to cool down fully before cleaning.
The body of the appliance should be cleaned with a damp cloth.
Do not use bleach, abrasive substances, or solvents for cleaning.
Wipe stubborn spots with a cloth dampened in soapy water or mild cleaner.
Unplug, clean, and ensure all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet, dirty, or hot.
Never wrap the power cord around the appliance.
There are no user serviceable parts; check basic operations if unit is not working.
Check wiring, socket, mains power, and plug connection for proper operation.
Consult retailer for repair/replacement; return with proof of purchase and reason.
Damaged supply cords must be replaced by manufacturer or authorized agent.
This unit is designed for 230V current only; other sources may cause damage.
Connect a three-pin plug using the provided color code for wires (Green/Yellow, Blue, Brown).
Tedelex warrants the product free of defects for 1 year from purchase date under normal use.
Notify supplier within warranty period; claims require proof of purchase.
Faulty products must be taken to the supplier's service centre to exercise warranty.
Warranty valid only if product not broken by customer or used for unintended purposes.
Warranty does not cover damage from disaster, misuse, tamper, abuse, or unauthorized modification.
Warranty extends only to the product, not expendables attached or installed by the customer.
If product fails within 3 months post-repair, supplier may replace or refund.
Customer may be responsible for costs if products returned are not in original or damaged packaging.
To Next Page