Need help?Do you have a question about the SALUPO MULTIPLUS 1 SA684 Series and is the answer not in the manual?
Guidelines for proper panel installation and environmental considerations.
Disclaimer regarding manufacturer responsibility for product misuse or neglect.
Warnings regarding electrical shocks, personal injury, property damage, and operational safety.
Illustrates configurations for dry running protection using COSφ.
Demonstrates system setups for clean water pumping.
Illustrates system configurations for sewage pumping.
Demonstrates setups using 4-20mA for pressure measurement.
Shows configurations for level measurement with 4-20mA.
Detailed wiring diagram for the SA684.xx model.
Specific wiring instructions for pressure transducers.
Wiring instructions for 4-20mA piezoresistive level transmitters.
Detailed wiring diagram for the SA687.xx model.
Specific wiring instructions for pressure transducers.
Wiring instructions for 4-20mA piezoresistive level transmitters.
Introduction to the quick programming sequence.
Details and outcomes of the automatic learning procedure.
Common problems and solutions during the auto-learning phase.
Explanation of the PAGE, MAN, AUT/ENTER, and RESET/ESC buttons.
Configuring parameters for COSφ applications.
Setting the waiting time for dry running conditions.
Defining the minimum COSFI value for dry running detection.
Configuring external inputs for motor control.
Configuring parameters for clean water applications.
Configuring parameters for sewage applications.
Adjusting the sensitivity of level probes.
Configuring parameters for 4-20mA bar pressure applications.
Setting the delay for motor start when pressure drops.
Defining the minimum pressure for motor stop.
Configuring parameters for 4-20mA meters level applications.
Setting the full scale for the probe used.
Setting the water level for motor turn-off.
Setting the water level for motor start.
Introduction to advanced programming options.
Setting the overload maximum current for the motor.
Setting the minimum current for motor control.
Setting the delay between motor test activations.
Setting the delay for the alarm output activation.
Configuring stable and unstable manual button modes.
Setting the waiting time for mains supply.
Setting the minimum operating voltage for the motor.
Basic operational principles of the control panel.
How the control panel operates for COSφ applications.
Starting and stopping the motor manually.
How external commands affect motor operation.
Operation of the control panel for clean water applications.
Operation of the control panel for sewage applications.
Display of input status for sewage applications.
Operation of the control panel for 4-20mA bar applications.
Display of system pressure in 4-20mA bar applications.
Operation of the control panel for 4-20mA meters applications.
Display of tank level in 4-20mA meters applications.
Setting and managing motor maintenance intervals.
Notification for performing motor maintenance.
Recording and displaying the last 20 stored alarms.
Recording and displaying the last 20 setup changes.
Common issues, their causes, and recommended operations.
Detailed explanations of various alarm messages and their triggers.
Information on automatic reset, manual reset, and alarm outputs.
Guidance on proper disposal of the product as WEEE.
List of standards the product complies with.
Details on product warranty coverage, duration, and claim procedures.
General| Brand | SALUPO |
|---|---|
| Model | MULTIPLUS 1 SA684 Series |
| Category | Control Systems |
| Language | English |
To Next Page