Need help?Do you have a question about the Salus VS10W and is the answer not in the manual?
General| Type | Thermostat |
|---|---|
| Temperature Range | 5-35°C |
| Display | LCD |
| Battery Backup | No |
| Output | Relay |
| Accuracy | ±0.5°C |
| Installation | Wall-mounted |
| Power Supply | 230V AC |
| Control Method | On/Off |
| Max Load | 5(3)A |
| Hysteresis | 0.5°C |
| Switching Current | 3A |
| Control Type | On/Off |
Information about CE compliance and EC directives for the product.
Guidance on using the product in accordance with regulations for heating systems.
Unit configured as an individual PRT.
Unit configured as a Group Control Thermostat for Dial Stats.
Unit configured as a Group Control Thermostat for Digital Stats.
Cable used to power thermostats and drive output.
Cable allowing thermostats to communicate for remote control and features.
Unit configured as individual PRT.
Unit configured as Group Control Thermostat for Dial Stats.
Unit configured as Group Control Thermostat for Digital Stats.
Functionality for PRT with or without communication.
Functionality for Group Control with communication.
Functionality for Group Control with communication.
Methods for connecting the cylinder thermostat to WC or VS10.
Used for Grouping Functions between thermostats.
Used for supplying power to the unit and switched output.
Used for external sensors or cylinder thermostats.
Visual guide to removing the front housing for mounting.
Guidance on optimal placement and areas to avoid for installation.
Checking wiring, securing the rear housing, and orientation.
Steps to align and attach the front housing to the rear.
Explains icons for thermostat modes like BOX, Sunny, Cloudy, Moon, Program, Party, Vacation, Frost.
Explains icons for heat, cool, temperature display, and manual override.
Explains icons for program numbers and day indication.
Explains icons for Hot Water (HW) status and modes.
Explains icons for floor sensor, low battery, setting, and keylock.
Details the functions of different keys (Up/Down, Left/Right, OK).
Shows the sequence of displays upon first powering the unit.
Parameter S01 for selecting thermostat type (PRT, Digital, HW Timer).
Parameter S03 for communication and grouping settings.
Steps to access and change system parameters.
Guidance on entering or changing system parameters.
Steps to configure the unit as a Programmable Room Thermostat.
Steps to configure the unit as a Hot Water Timer without communication.
Steps to configure the unit as a Group Control Thermostat.
Steps to configure the unit as a Hot Water Timer within a group.
Steps to configure as Group Control Thermostat for digital stats.
Steps to configure the unit as a Group Thermostat.
Steps to configure as Hot Water Timer within a group.
Parameters D01, D05, D03, D06 for control and setup.
Parameters D08, D09, D14-D16 for frost, time, and floor sensor limits.
Table listing error codes and their meanings for different modes.
Details on model, type, programming modes, and rating.
Specifications for operating temperature and storage.
Steps to select 12-hour or 24-hour format.
Steps to set the hour and minute for the clock.
How to adjust the hour and minute using arrow keys.
Steps to adjust the year, month, and day settings.
Explains preset heating temperatures (Highest, Mid, Lower, Frost).
Explains preset cooling temperatures (Occupied, Unoccupied, Evening).
Default heating schedule for Monday to Friday.
Default heating schedule for Saturday to Sunday.
Default cooling schedule for Monday to Friday.
Default cooling schedule for Saturday to Sunday.
Explains icons for operations like pressing buttons or flashing.
Explains the key for saving and exiting.
Steps to set the low temperature for the program schedule.
How to adjust temperature levels for different modes.
How to select days for programming the temperature schedule.
How to set the time for a program.
How to select Hi/Mid or low temperature settings.
How to set programs 4, 5, or 6.
How to set a program to remove it from the schedule.
Steps to view and enter temporary override settings.
How to confirm the temporary set temperature.
How to cancel a temporary override.
Steps to set a permanent low temperature.
How to adjust the permanent override temperature.
Steps to select the duration for Party Mode.
How to confirm and start the Party Mode countdown.
Steps to select the duration (days) for Holiday Mode.
How to confirm and start the Holiday Mode countdown.
Steps to select the frost protection temperature.
Notes on frost protection behavior in cooling mode.
How group thermostats follow the group control thermostat's mode.
What happens when a group thermostat leaves a group.
How a group thermostat returns to the group.
How to set the hot water to follow the program schedule.
How hot water timer follows Holiday mode from the group thermostat.
How to set the hot water timer to continuously off.
Steps to set the duration for Hot Water Boost.
Default hot water schedule for Monday to Friday.
Default hot water schedule for Saturday to Sunday.
Steps to set programs for hot water times.
Steps to set ON and OFF times for hot water.
How to repeat steps for programs 2 and 3.
To Next Page
