Assembly Instructions:
1 Open Box One that contains the Frame Assembly.
2 Confirm that all parts listed for Box One are present. If any parts are missing, please call Match
Mate Tennis at 614-836-2677.
3 Attach Right Frame Leg to the right side of the U Frame using the 3/816 x 2” (HHCS) and 3/8
lock washers. Tighten the HHCS until snug. Do not fully tighten at this stage.
4 Attach the Left Frame Leg to the left side of the U Frame using the 3/816 x 2” (HHCS) and 3/8
lock washers. Tighten the HHCS until snug. Do not fully tighten at this stage.
5 Open Box Two that contains the main assembly.
6 Confirm that all parts listed for Box Two are present. If any parts are missing, please call Match
Mate Tennis at 614-836-2677.
7 While the Ball Delivery Unit is still in the box, attach the Left Handle to the Ball Delivery Unit
using the 1/4 - 20 x 3/4” button head cap screws and the 1/4 locking washer.
8 Using the Left Handle and the main assembly mounting tube, lift the Ball Delivery Unit out of the
box and set it on the foam. WARNING: Do not lift the Ball Delivery Unit out of the box using the
white plastic head. Doing so may cause damage to the plastic housing. CAUTION: The removal of the
Ball Delivery Unit from the box requires two people.
9 Attach Right Handle using the 1/4- 20 x 3/4” button head cap screws and the 1/4 locking washer.
10 Using two people, slide the Ball Delivery Unit on the Frame Assembly Tubes. Attach the Ball
Delivery Unit to the Frame Assembly using the 3/8 – 16 x 2 1/2” (HHCS) and the 3/8 lock washers.
Tighten firmly.
11 Tighten firmly the HHCS mentioned in step 3 and 4 used to attach the left and right leg
frame to the U Frame.
12 Attach the Ball Hopper to the Ball Delivery Unit using the 1/4 - 20 x 1/2” Phillips pan head screws
and 1/4 washers. CAUTION: Hopper should have a rubber O ring ball separator attached. Position the
hopper so that the ball separator is over the drop hole. If the O ring is missing or assembled incorrectly,
one will experience double firing and ball jams underneath the carousel.
To Next Page
Loading...