Sam Coach - User Manual

Part List:
The SAM commercial ball machine is shipped in two boxes.
Box One is the Frame Assembly and contains the following parts:
a. Right Frame Leg x 1
b. Left Frame Leg x 1
c. U Frame x 1
d. Ball Hopper x 1
Box Two is the Ball Delivery Unit and contains the following parts:
a. Ball Delivery Unit x 1
b. Right Handle x 1
c. Left Handle x 1
d. 3/8– 16 x 2” Hex head cap screws (HHCS) for frame assembly x 4
e. 3/8 lock washers for frame assembly x 4
f. 1/4 - 20 x 1/2” Phillips pan head screws for ball hopper x 4
g. 1/4 washers for ball hopper x 4
h. 3/8 – 16 x 2 1/2” hex head cap screws for ball delivery unit x 4
i. 3/8 lock washer for ball delivery unit x 4
j. 1/4 - 20 x 3/4” button head cap screws for handles x 4
k. 1/4 lock washers for handles x 4

Summary

Assembly Instructions

General Information and Safety

Important Safety Precautions

Critical warnings for safe operation to prevent harm.

Machine Positioning Guide

Instructions on how to position the ball machine for optimal use.

SAM COACH Controls and Operation

SAM COACH Shot Programming and Features

SAM SPORT Controls and Operation

FEED Control

Operation of the ball feed carousel and timing adjustment.

SPEED Adjustment

How to adjust the speed of the balls shot from the machine.

SPIN Calibration

ELEVATION Adjustment

SAM SPORT Shot Programming and Features

SHOT POSITION Programming

MAINTENANCE Procedures

Limited Warranty

Sam Coach Specifications

General

Brand	Sam
Model	Coach
Category	Accessories
Language	English