Standards
Conforms to IEC 61010-1 (EN 61010-1), IEC 61010-2-032
(EN 61010-2-032), CAT III 1000V, CAT IV 600V, Class II, Pollution
degree 2, Indoor use.
CAT III: Is for measurements performed in the building installation.
CAT IV: Is for measurements performed at the sourec of the low-voltage
installation.
EMC: Conforms to EN 61326-1: 2006
Compliant with the relevant EU directives
The symbols used on this instrument are:
Dangerous voltage.
Caution, refer to accompanying documents
Equipment protected throughout by Double
insulation (Class II)
Alternating current
Direct current
Ground
To Next Page
Loading...