Sam4POS KP Routing Supplement v2.1 - 10 - Table of Contents
KP Group (v1.0.79 and Earlier)
Use this programming area to determine the KP Groups that will be used for assignment in the PLU Status
Group programming. You can assign KP Groups to different printers at different time periods if desired.
Note: You must create a KP printer in the Device Mapping before you can create a KP Group.
Note: KP Time Periods must be created prior to assignment here.
1. From the Program Mode/Device/DEVICE MAPPING screen, press the drop-down arrow on the
section title to view the sub menu selections. Select KP GROUP from the available selections. The KP
GROUP program screen is displayed:
2. From the KP GROUP programming screen press the icon to add a new KP Group(s) or select a group
from the KP Group list.
3. Input a description (up to 30 characters) for the KP Group and press OK to close the dialog or press OK
AND CONTINUE to add additional KP Groups. Press CANCEL if you wish to exit the add KP Group
without adding the group.
4. After the KP Groups are created, press the NEW button to assign the KP group to a printer and selected
the time period for the group. You can add more than one printer/time period for the group. Operation
Buttons are provided to maintain the KP Group settings:
5. GOTO – will bring you to the Device Setting programming. This allows you to Add/Edit devices without
having to exit out of the KP Group programming.
6. NEW – to assign printers (from Device Mapping) to the KP Group and select the time period for the KP
group. The default Time period is ALWAYS, additional time periods for use here are created in: Program-
Mode\Time Schedule\KP Time Period. You can add more than one printer/time period for the group. i.e.
In an IRC system, you may have KP printers assigned for each station.
To Next Page
Loading...
