Sam4s SAM4POS - Adding Kitchen Printers

Sam4POS KP Routing Supplement v2.1 - 13 - Table of Contents
Adding Kitchen Printers
Kitchen Printers are listed in the right most column on the Device Mapping Screen
1. Press the NEW button to assign a device. The NEW item dialog displays:
INPUT DESCRIPTION
Type in a description for the device (up to 30 characters). i.e. KP Grill, Bar, Cold, etc.
SELECT DEVICE
Choose the printer from the list of available printers as set in the Device Setting.
SELECT FROM TERMINAL
Chose the terminal from the list where the device is connected.
TICKET COUNT
Set the number of KP tickets to be printed.
KP TYPE
Select the type for the specified device.
• Normal – Prints all items on one ticket.
• Single – Prints each item on a separate ticket; (regardless of the KP Option settings).
• Normal & Single – Prints all items on one ticket & prints each item separately.
• Single & Normal – Prints each item on a separate ticket & prints all items on one ticket.
SELECT BACKUP DEVICE
Set if you wish to define a backup device in the case the main device is offline.
SELECT BACKUP TERMINAL
Select the terminal where the backup device is connected.
2. Press OK when complete to add the device mapping or press OK AND CONTINUE to map more
printers. Press CANCEL if you want to exit without mapping additional kitchen printers.
3. Your mapped devices will display: