Sam4POS KP Routing Supplement v2.1 - 18 - Table of Contents
PLUProgramming:
PLU’s you want to send to a kitchen printer must be assigned to a PLU Status Group that is set to send to the
appropriate KP Group.
PLU
1. From the PROGRAM MODE menu, touch PLU to view the PLU program selection window then select
PLU from the available selections.
2. Select the PLU you want to program:
3. In the GENERAL section for the selected PLU, select the appropriate PLU STATUS GROUP LINK for
the PLU by pressing the green to access the selection dialog:
To Next Page
Loading...
