SaMASZ SAMBA 280 Assembly Instructions

Page 5 of 10
MACHINE TYPE
SAMBA
No.
Action
Figure / Photo / Other
Fasten welded frame to transmission using 4 bolts with 4
washers.
- bolt M12x 40 cl. 8.8 zinc-pl. – 4 pcs
- lock washer dia 12.2 zinc-pl. – 4 pcs
Before screwing the bolts, apply some blue assembly
adhesive for better installation in the transmission.
This operation must be carried out, while fastening frame to
cutterbar (previous step).
3
Assembly of
gearbox guard
and right guide
guard
Screw transmission guard using:
- bolt M 8x 20 cl. 8.8 zinc-pl. with neck – 2 pcs
- washer dia 8 zinc-pl. – 2 pcs
- self-locking nut M 8 cl. 8 zinc-pl. – 2 pcs
Fasten rubber-metal buffer 40 x 18 type D to transmission
guard using:
- washer dia 8 zinc-pl.
- self-locking nut M 8 cl. 8 zinc-pl.
4 bolts with
washers
2 bolts with
washers and
nuts
Rubber-metal
buffer

SaMASZ SAMBA 280 Specifications

General

Brand	SaMASZ
Model	SAMBA 280
Category	Farm Equipment
Language	English