We hope you will be satisfied with your new model. If you have any questions be sure to
look at our webpages www.f3j.com . Additional info about the setup and detailed pictures
can be found there.
Important notice for pilots with Prestige 2PK F3J version
You need to stick the rudder to the fuselage with epoxy. Fixed connection.
Roughen both glued surfaces before gluing. Care must be taken not to glue the rudder
pushrod. Do not put any glue in the vicinity of the rod.
The Prestige 2PK is originally designed as an F5J model. The connection between the
rudder and the fuselage is not strong enough for the F3J start.
Regards
Samba Model
Webpage: www.F3J.com / Email: samba@f3j.com
To Previous Page
Loading...