SAME Lizard - Page 5

5
EN
User Manual
9918UT
Package contents: radio-controlled lizard, remote control, user manual.
Before rst use
Insert 4 AAA 1.5 V batteries into the toy (batteries not included), paying attention to the correct
polarity.
Warning! Batteries must be installed by adults only. Pay attention to the correct polarity. Do not
store used batteries in the toy. Do not use old and new batteries at the same time. Do not use
alkaline, saline (carbon-zinc) and rechargeable (nickel-metal hydride, nickel-cadmium) batteries
at the same time. We recommend using alkaline batteries. Remove batteries from the toy and
other equipment during transportation or long-term disuse.
Insert 3 AAA 1.5 V batteries into the remote control (batteries not included), paying attention to
the correct polarity.
Turn on the toy by pressing the power button.
The remote control has a frequency channel switch (A, B, C) in case radio interference occurs on
any of the channels, which aects the control of the lizard.
The lizard has 4 dierent functional modes. To change the mode, press and hold for a few
seconds 2 small buttons located on the back of the lizard, between the head and the power
button. There are 4 LED indicators for each mode.
WARNING!
Not intended for children under 36 months. Contains small parts – choking hazard.
Use under direct adult supervision.
If a part of a toy is damaged, it must not be used, it may have sharp traumatic elements.
We recommend to check the condition of the toys your child is playing with periodically to
avoid possible injury.
Mode switching
buttons
Power button Forward/
backward
movement button
Frequency
channel switch
Cloak opening/
folding button
Same Toy
Lizard RC robot
EN