How to fix a Sammic CK-5 Food Processor that does not start?
If your Sammic Food Processor doesn't start when you press 'On', it might be because the lid isn't correctly in place, there's an issue with the system for lowering the magnet in the pot, or a problem with the detector in the lower cover. Check that the lid is correctly positioned, inspect the magnet system in the pot, and verify the detector in the lower cover.
Why are the speed and mains lights blinking on my Sammic CK-5?
If the speed and mains connection lights are blinking on your Sammic Food Processor, the thermal relay of the motor may have tripped, the motor could be overloaded, or the machine is operating in 'two wire'.
What to do if slow and fast mode lights blink on Sammic CK-5 Food Processor?
If the slow and fast mode lights are blinking simultaneously on your Sammic Food Processor, the bayonet mechanism might not be closed properly. Also, check the magnet associated with it and the detector in the lower cover. Ensure the bayonet mechanism is securely closed and inspect the magnet and detector.
What to do if Sammic CK-5 does not start and SE appears on the display?
If your Sammic Food Processor doesn't start and 'SE' appears on the display, it indicates that some safety devices are disabled. Make sure all components are correctly positioned.
What does 'E1' on the Sammic Food Processor display mean?
If 'E1' appears on the display of your Sammic Food Processor, a variable frequency drive safety device has been activated. To resolve this, disconnect the machine from the mains and wait.
Why doesn't the display light up on my Sammic CK-5?
If the display of your Sammic Food Processor does not light up, it could be due to no power supply to the display or a broken electronic control board.
Guidance on recommended uses for different operations.
Identification of machine components in Figure 3.
Lists relevant directives, standards, and model details.
Key instructions for safe operation, supervision, and handling.
Requirements for machine placement and safe electrical hookup.
Description of buttons, lights, and indicators for the CK model.
Description of display and controls specific to the CKE model.
How to adjust speed settings and program time-out functions.
Explanation of the automatic power-off feature.
Instructions for using both CK and CKE models.
Steps for initial cleaning, preparation, and attachment assembly.
List of optional blades and accessories for the machines.
Detailed steps for cleaning the machine after use.
Regular checks to ensure machine safety and performance.
Instructions on how to properly sharpen and handle the cutter blades.
Solutions for common problems and error codes for CK/CKE models.
Reinforces supervision needs and user limitations for machine operation.
General| Model | CK-5 |
|---|---|
| Category | Food Processor |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Bowl/Hopper Capacity | 5.5 liters |
| Motor block | Aluminium |
To Next Page