To Next PageTo Next Page
Need help?Do you have a question about the Sammic SmartVide 5 and is the answer not in the manual?
Specifies the recommended placement and environmental conditions for operation.
Details on connecting the appliance to the power supply, emphasizing safety.
Step-by-step guide to preparing the container and starting the device.
Instructions for daily cleaning and periodic appliance maintenance.
Procedure for removing limescale buildup from the appliance.
Guidance on cleaning the connectors of the needle probe to ensure accurate measurements.
Navigating device settings and accessing pre-loaded recipes.
Step-by-step guide for operating the SmartVide device, including heating and timing.
Key operational notes and an overview of the control buttons.
Connecting and using the needle probe for temperature monitoring.
Overview of the device's technical specifications and status indicators.
Understanding and responding to various error messages and fault indicators.
Adjusting units, resetting the device, and managing sound settings.
Steps to diagnose and resolve issues where the machine fails to power on.
Troubleshooting alerts related to insufficient or blocked water level detection.
Information on handling warnings that appear after a power interruption.
Diagnosing and resolving issues related to the device overheating.
Addressing fault warnings for the water temperature probe and stirrer motor.
Diagnosing issues with heater resistance and cable connections.
Resolving problems with the SmartVide app finding or pairing with devices.
General| Power | 1200 W |
|---|---|
| Water Capacity / Maximum Bath Volume | 5 liters |
| Control Type | Digital |
| Temperature Stability | ±0.1 °C |
| Total loading | 5 kg |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Material | Stainless Steel |
| Timer | Yes |
| Capacity | 5 liters |
