Need help?Do you have a question about the Samson Airline AH9 and is the answer not in the manual?
Antenna mountings allow full rotation for optimum placement and can be folded inward for convenience.
Scans for the optimal channel and enters IR Set mode to pair the receiver with the transmitter.
The two-digit display shows the receiver's current operating channel.
Lights green when the receiver is receiving RF signal and the system is ready.
Uses infrared light to set the transmitter channel during the IR SET process.
Lights red when the transmitted audio signal is overloaded.
Rotary knob controls receiver output level and powers the AR99m on and off.
Provides 5V power for charging the AH9 transmitter or connecting an XPD system.
Connects the supplied power adapter; do not substitute other types to avoid damage.
1/4" and 1/8" jacks for connecting to consumer audio equipment.
Electronically balanced XLR jack for connecting to professional audio equipment.
Press and hold to turn on/off; quick press mutes/unmutes the transmitter.
LED displays operation mode, low battery, and recharge status (Green, Amber, Red).
Adjusts volume level (9 levels) by pressing the + or - buttons.
Captures infrared signal from the receiver to channelize the transmitter.
Connects the magnetic charging cable to recharge the internal Lithium Ion battery.
Instructions for sizing the headset and adjusting the microphone boom for optimal performance.
Guidance on positioning the microphone element for clear audio and reduced noise/pops.
Tips on charging, usage, storage, and care for optimal battery performance and longevity.
To Next Page
General