Need help?Do you have a question about the Samson MCD2Pro and is the answer not in the manual?
Connect instruments or line level signals to the 1/4" hi-Z input jacks.
Connect line level signals via unbalanced RCA jacks, parallel to 1/4" and stereo inputs.
Connect line level signals via an 1/8" stereo jack, parallel to other inputs.
Attenuates input level by -12dB to prevent distortion with high-level signals.
Routes stereo inputs to respective outputs or sums them for mono output.
Male XLR connectors providing balanced low-Z outputs for mixer inputs.
Disconnects the input ground (shield) to eliminate hum and buzz.
Connect instruments or line level signals to the 1/4" hi-Z input jacks.
Connect line level signals via unbalanced RCA jacks, parallel to 1/4" and stereo inputs.
Connect line level signals via an 1/8" stereo jack, parallel to other inputs.
Attenuates input level by -12dB to prevent distortion with high-level signals.
Routes stereo inputs to respective outputs or sums them for mono output.
Male XLR connectors providing balanced low-Z outputs for mixer inputs.
Disconnects the input ground (shield) to eliminate hum and buzz.
General| Brand | Samson |
|---|---|
| Model | MCD2Pro |
| Category | Accessories |
| Language | English |
To Next Page