Need help?Do you have a question about the Samson PowerBrite PB10 and is the answer not in the manual?
General| Input Voltage | 120V AC |
|---|---|
| Output Voltage | 120V AC |
| Number of Outlets | 10 |
| Maximum Output Current | 15A |
| Maximum Load Current | 15A |
| Surge Protection | Yes |
| Rack Mountable | Yes |
| Weight | 5.5 lbs |
| Input Frequency | 50Hz/60Hz |
| Circuit Breaker | Yes |
| Protection | Overload |
| Dimensions | 19" x 7.5" x 1.75" |
| Indicators | Power |
Resettable 10 amp circuit breaker protects all connected gear from overload.
Controls power to the rear panel switched outlets; status light indicates 'ON'.
Heavy duty, 14 gauge mains power cord for connecting to AC source.
Eight standard IEC outlets controlled by the front panel outlets switch.
Resettable 10 amp circuit breaker protects all connected gear from overload.
Adjusts the brightness level of the slide-out LED lamps.
Dual slide-out LED lamps illuminate rack gear; lamps turn on automatically.
Controls power to rear panel switched outlets; status light indicates 'ON'.
LED meter displays incoming voltage to the unit.
LED meter displays current drawn by connected equipment.
To Next Page
