Satellite • USB/iOS Broadcast Microphone12
Setting Sample Rate in Windows
5.Select a bit depth and sample rate from the drop-down menu
6. Press OK until you are back to the Sound properties window
7. Do steps 2 through 5 again, but this time for the Input device, and
make sure the sample rates are the same for both input and output
Sample rates must be the same
Only the sample rate (Hz) needs to match. The bit depth can be
different if needed. For example, these settings are compatible:
Output: 2 channel, 16 bit, 48000 Hz
Input: 1 channel, 24 bit, 48000 Hz
These settings are not compatible:
Output: 2 channel, 24 bit, 48000 Hz
Input: 1 channel, 24 bit, 44100 Hz
To Next Page
Loading...
