See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
Power port
Connect the DC adapter for your monitor to the power port on the
back of the monitor. Plug the power cord for the monitor into a nearby
outlet.
DVI port
Connect the DVI cable to the DVI port on the back of your monitor.
D-sub 15-pin port
Connect the signal cable to the 15-pin, D-sub connector on the back
of your monitor.
See Connecting the Monitor for further information regarding cable connections.
To Next Page
Loading...
