51
Resizing or Relocating the Screen
5
5 Resizing or Relocating the Screen
z The PBP function may not be available depending on the specifications of the graphics card used.
If the screen is blank in PBP mode when the optimum resolution (1280 x 1440) is selected, go to
Control Panel Display Screen Resolution and click Detect on the PC.
(Instructions are based on Windows 7.)
If the screen is blank when the resolution is set to 1280 x 1440, change the resolution to 1280 x
1024.
(For further details on how to configure the resolution, refer to "2.2.4 Changing the Resolution
Using a PC".)
5.1.2 Contrast
1 Press [ ] on the product.
2 Press [ ] to move to SIZE&POSITION and press [ ] on the product.
3 Press [ ] to move to PBP and press [ ] on the product.
4 Press [ ] to move to Contrast and press [ ] on the product.
The following screen will appear.
5 Press [ ] to move to the option you want and press the [ ].
6 The selected option will be applied.
To Next Page
Loading...
