Samsung 5000 - Page 2

To Previous Page

I I I

* If a file you deleted from the PC is still found when you run Media

Play, use the "Empty the Recycle Bin" function on the PC to

permanently delete the file.

* Photos only supports the sequential jpeg format.

* The Videos option does not support the scene search and

thumbnail functions.

* If the number of files and folders saved on a USB storage device is

over approximately 4000, the files and folders may not appear and

some folders may not open.

* The maximum number of files the TV can display, including sub

[ciders, in one [older of a USB storage device is 2000.

* The media may not play smoothly if you use a USB device rated

lower than USB 2.0.

Videos

1. In the Media Play menu, press the 41 or _. button to select Videos,

and then press the ENTER _ button.

2. Press the _I/I_/A/V" buttons to select a video in the file list.

3. Press the ENTER _ button or [_ (Play) button.

- The file name is displayed on the top of the screen with the playing

time.

, Supported Video Formats

Divx3.11/4Y

t 920xt 080 6--80 30Mbps

5.1/6.0

*.mp4 MP4 H264 i t92gxt 080 6--8g 30Mbps

AVC i t920xt 080 6--80 30Mbps

MJPEG 640x480 6--80 10Mbps

Divx3.11/4Y

t 920xt gag 6--30 30Mbps

5.1/6.0

"*.avi "AVI MPEG4SP/ i t920xt080 6--80 30Mbps

ASP

*.mkv" MKV"

H264 t 920xt 080 6--80 30Mbps

MJPEG 640x480 6--30 10Mbps

Divx

3.11/4.7-/ i t920xt080 6--80 30Mbps

5.1/6.0

ASF MPEG4 SP/

t 920xt 080 6--80 30Mbps

ASP

H.264 t 920xt 080 6--80 30Mbps

"*.ts MPEG2 t 920xt 080 6_30 30Mbps

- If video time information is unknown, playing time and the progress *.m2ts"

bar are not displayed.

- During video playback, you can search using the _1 and i_ "*.dat

buttons.

'-J_ In this mode, you can play movie clips contained in a game, but you *.vob"

cannot play the game itself.

o Supported Subtitle Formats *.3gp

- External

MPEG-4 timed text

SAMI

SubRip

SubViewer

Micro DVD

SubStation Alpha

Advanced SubStation Alpha

- Internal

Xsub I AVI

SubStation Alpha I MKV

Advanced SubStation Alpha I MKV

SubRip MKV

MPEG-4 T med text MP4

.ttxt

.smi

.art

.sub

.sub or .txt

.ssa

.ess

H. 264 BP/

t 920xt 080 6--30 30Mbps

MP/HP

MP3 /

ADPCM /

AAC

"MP3 /

AC3 /

LPCM /

ADPCM

/ DTS

Core _

"MP3 /

AC3 /

LPCM /

ADPCM

/ Wive.

/ Wlv_.

Pro"

AC3 /

AAC/

MP3 /

DD+ /

HE_AAC

MPEGt t 920xt 080 24/25/30 30Mbps AC3/

PS MPEG2 t 920xt 080 24/25/30 30Mbps MPEG/

LPCM /

H. 264 BP/

t 920xt 080 6--80 30Mbps AAC

MP/HP

MPEG4SP/ i t920xt080 6--80 30Mbps

3GPP ASP MP3

H.264 i t920xt 080 6--80 30Mbps

H.264 t 920xt 080 6--80 30Mbps

flash

*.flY formats Sorenson t920xt O8O 6--80 30Mbps MP3

H.263

Other Restrictions

, Video content will not play. or not play correctly, if there is an error in

the content or the container.

, Sound or video may not work if the contents have a standard bit rate/

frame rate above the compatible Frame/sec listed in the Supported

Video Formats table.

, If the Index Table contains an error, the Seek (Jump) function will not

work.

, The menu may take longer to appear if the video's bit rate exceeds

10Mbps.

Picture Format , Video content may not be play if there is too much content in one file.

Text Format

Text Format Supports up to H.264, Level 4.1

Text Format H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not

supported.

MPEG4 SP,ASP :

- Below 1280 x 720:60 frame max

- Above 1280 x 720:30 frame max

H.263 is not supported.

GMC is not support.

Supports up to WMA7, 8, 9 STD, 9 PRO, and 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel.

(LBR mode of WMA Pro is not supported.)

WMA Lossless is not supported.

Music

1. In the Media Play menu, press the 41/_- buttons to select Music,

and then press the ENTER _ button.

2. Press the _I/I_/A/_ r buttons to select the desired Music in the file

list.

3. Press the ENTER _ button or _ (Play) button.

'_ During music playback, you can search using the 41/1_ buttons.

'_ [_ (REW) and [_ (FF) buttons do not function during play.

'-J_ Media Play only displays files with MP3 file extensions. Other file

extensions are not displayed, even if they are saved on the same

USB device.

'-J_ If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file may

cause a sound problem.)

Photos

1. In the Media Play menu,, press the 41 or _. button to select Photos,

then press the ENTER _ button.

2. Press the _l/_./A/_r buttons to select a photo in the file list.

3. Press the ENTER _ button or _ (Play) button.

'-J_ NOTE

* While a photo list is displayed, press the _ (Play) / ENTER_

button on the remote control to start a slide show.

* All files in the file list section will be displayed in the slide show.

* During the slide show, files are displayed in order.

* During the slide show, you can adjust the slide show speed using

(l_) (REW) or ([_) (FF) button.

* You can move to other files using the 41 or _ button.

* Media Play can play Music files automatically during a Slide Show

if Background Music is set to On.

* You cannot change the Mode in Background Music until the

Background Music file has finished loading.

, Supported Photo Formats

JPEG

Basedine

Progressive

15360x 8704

1024 x 768

Other Restrictions

" CMYK and YCCK color space JPEGs are not supported.

Playing Multiple Files

Ii Playing selected video/music/photo files

1. On the File List screen, highlight a file, and then press the Yellow

button on your remote.

2. Repeat Step 1 to select multiple files.

_-J_ NOTE

" A ,_ mark appears to the left of the selected files.

To cancel a selection, press the Yellow button again.

* To deselect all selected files, press the TOOLS button, select

Deselect All, and then the ENTER _ button.

3. Press the TOOLS button, select Play Selected Contents, and then

press the ENTER _ button.

Ii Playing a video/music/photo folder

1. With the folders on your USB device displayed, use the 41/l_/J,/_r

buttons to highlight a folder.

2. Press the TOOLS button, select Play Folder, and then press the

ENTER _ button,

Media Play - Additional Functions

Ill Videos/Music/Photos Play Option menus

When playing a file, press the TOOLS button,

Title

Repeat Mode

Picture Size

Picture Mode

Sound Mode

Subtitle Setting

Audio Format

Audio Language

Stop Slide Show /

Star{ Slide Show

Slide Show Speed

Background Music

Zoom

Rotate

Intormation

You can select another video file

to play directly. _/

You can play movie and music

files repeatedly. _/ _/

You can adjust the picture size to

your preference. _/

You can adjust the picture

setting. _/

You can adjust the sound setting. _/ _/

You can play the video with

Subtitles. This function only

works ifthe subtitles have the _/

same file name as the video.

You can select the digital audio

output format. _/

You can change the audio

language ff the video has more _/

than one language.

You can start or stop a Slide

Show.

You can select the slide show

speed during the slide show.

You can set and select

background music when

watching a Slide Show.

You can zoom into images in full

screen mode.

You can rotate images in full

screen mode.

You can see detailed information

about the played file. _/ _/

Settings

Using the Setup Menu

ill DivX® Video On Demand : Shows the registration code authorized

for the TV. If you connect to the DivX web site and register with the

10-digit registration code, you can download the VOD activation file.

Once you run the file using Media Play, the registration is completed,

_-_ For more information on DivX® VOD, visit "http://vod,divx.com".

Information: Select to view information about the connected USB

device.

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the

wall.

For detailed information about installing the wall mount, see the

instructions provided with the wail mount kit. Contact a technician for

assistance when installing the wall mount bracket. Samsung Electronics

is not responsible for any damage to the product or injury to yourself or

others if you elect to install the wall mount on your own.

Wall Mount Kit Specifications (VESA)

'-_± The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. If you

are attaching the wall mount to a wail made of building materials other

than drywall, please contact your nearest dealer for information about

the appropriate mounting hardware. If you install the TV on a ceiling or

slanted wall, it may fall and result in severe personal injury.

'-_s NOTE

* Standard dimensions for wall mount kits are shown in the table

below.

* When purchasing our wall mount kit, a detailed installation manual

and all parts necessary for assembly are provided.

* Do not use screws that do not comply with the VESA standard

screw specifications.

* Do not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set,

* For wail mounts that do not comply with the VESA standard screw

specifications, the length of the screws may differ depending on

the wall mount specifications,

* Do not fasten the screws too firmly, This may damage the product

or cause the product to fall, leading to personal injury, Samsung is

not liable for these kinds of accidents,

* Samsung is not liable for product damage or personal injury when

a non-VESA or non-specified wail mount is used or the consumer

fails to follow the product installation instructions,

* Do not mount the TV at more than a 15 degree tilt,

* Always have two people mount the TV on a wall,

r_tOn Lock

The Kensington Lock is not supplied by Samsung. It is a device used

to physically fix the system when using it in a public place. Refer to the

manual provided with the Kensington Lock for additional information on

proper use.

'-_ Please find a "_" icon on the rear of the TV. The Kensington slot is

beside the "l_" icon.

'-_ The position and color may differ depending on the model.

Assembling the Stand Wire Holder

Display Modes (HDMI/DVI Input)

Optimal resolution: 1920 x 1080@60Hz

1g_22

26-28

LED-TV

32-42

46-60

75 X 75

100X 100

200 X 200

400 X 400

Do not install your Wall Mount Kit while your

TV is turned on. It may result in personal

injury due to electric shock.

Securing the TV to the Wall

Caution: Pulling, pusn_ng, or almDing onto the TV ma,

cause the TV to fa . in oarBcular, ensure tnat your cnllaren

ao no_ nang over or destabilize the TV. Doing so may cause

the TV to tip over. resulnng in serious in dries or aea_n

Follow all safety precautions grovlaea on the included

Satety Flyer. For added stability, nstall the anti-fall device for

satety purposes, as aescnDed Delow

IBM

MAC

720 x 400 31469 70087 28 322

640 x 480 35000 66667 30240

832 x 824 49726 74551 57284

1152 x 870 08681 75002 100000

640 x 480 31469 5_940 25 175

640 x 480 37861 72809 31 500

640 x 488 37508 75000 31 500

880 x 608 37879 60317 40000

800 x 800 48077 72188 50000

800 x 800 46875 75000 49 500

1024 x 768 48363 60004 65000

1024 x 768 56476 70069 75000

1024 x 768 00023 75029 78750

1152 x 884 07508 75000 108000

1280 x 720 45008 60000 74250

1280 x 880 49702 5_810 83 500

1280x 1024 03981 60020 108000

1280x 1024 79976 75025 138000

1300x 768 47712 5_790 85500

1440 x g00 55935 5_887 106500

1880 x 90ORB 00008 60000 108000

1880x 1050 05290 5_954 146250

1920x 1080 67500 80000 148500

-/-

+/+

Caution of the cover-jack

CAUTION: The cover-_ack is for use by c Jalified service

personne_ only. To reduce the risk of electric shock or fire

nazaro, dO not use ]:Recover JACK, unlese you are aualified

[o ao so.

TV Rear Panel

To prevent the 33/from falling

_'-_ TV Holder kits are sold separately. To purchase a TV Holder kit

contact Samsung Customer Care.

1. nser_ me screws into the wail brackets and firrr fasten them to the

wall. Make sure the screws are _'-- fixed to the wa

_'--.L We strop _ly recommend you drive iRe screws Into a StUd

2. insert me screws rnrough the -rv brackets and then fasten the

screws ro rne _or VESA screw holes on me eacK of the TV.

3. Connect the brackets on the TV and the bracKets on the wall wgn a

strong stung or Cable and then tie the siring or caDle Bgnrly to the

DraoKe_5

"-_ /erifv a connections are eroDenv secured. Periodicall cnecK rne _-._ The groduct shape may differ depending on ]:ne model.

connections for any sign of fatigue or failure. If you have any doubt

about the security of your connections, contact a professional

installer.

'q.c Install the TV close to the wall so that it does not fail.

"-_ Connect the string or cable so that the brackets on the wall are at

the same height or lower than the brackets on the TV. Untie the

string or cable before moving the TV.

If the TV seems to have a problem, first review this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.

com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Flickering and Dimming If your Samsung television is flickering or dimming sporadically, you may need to disable some of its energy efficient features

like the Eco Sensor or the Energy Saving feature. Using your remote, follow the steps below to turn these features off or

on.

Energy Saving : MENU _ Setup _ Eco Solution _ Energy Saving

Eco Sensor : MENU _ Setup _ Eco Solution _ Eco Sensor

Component Connections / If you find that the color on your Samsung television's screen is not correct or black and white, first run a Self Diagnosis test

Screen Color on the TV to make sure there are no device issues.

Self Diagnosis : MENU _ Support _ Self Diagnosis _ Picture Test

If the test is ok, try making sure:

Your connections are all consistent. For example, if you've used the AV in jack on your TV, make sure you have used the

AV Out jack on your video source.

Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr,

and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the

blue Pb jack on the %4 the red Pr jack on the source to the red Pr jack on the %4 etc.

Screen Brightness if you find that the colors on your Samsuog TV are correct but just a little too dark or bright, there are some settings you

should check before calling for a repair.

Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go to "Picture" on the User Menu, and then

try adjusting these options.

Unwanted Powering off if your Samsung TV appears to turn off by itseff, there may be an issue with either your Timer seffings or your Eco friendk/No

Signal Power Off feature.

First make sure your Sleep Timer is not accidentally set. The Sleep Time allows you the comfort of falling asleep with the TV

still on but, turns it off after a certain period of tkne so as not to waste energy.

Sleep Timer : MENU _Setup _ Time _ Sleep Timer

]f the Sleep Timer is not activated, you may have eogaged the No Signal Power Off or Auto Power Off feature.

No Signal Power Off : MENU _ Setup _ Eco Solution _ No Signal Power Off

Auto Power Off : MENU _ Setup _ Eco Solution _Auto Power Off

Trouble Powering On Before you turn the "iV on, find the red light on the right or left bottom of your TV. Press the power on button on the

TV or remote and the light should blink about 5 times before the TV turns on.

If you find that you are having trouble powering on your Samsuog television, there are a number of things to check before

making a call to the service department.

If you happen to be using the %/as a monitor and the stand-by light only blinks for a few seconds when you press the

power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the

mouse. Then try turning your TV on.

If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have

a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputtiog a signal. To test the

signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the

screen displays the guide or info data, the problem is caused by the box.

Stand Assembly If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.

Cannot find channel Re-run plug and play.

Poor Picture First, perform the Picture Test and to see _ your TV is pr0Per_' displaying the test image.

Go to MENU : Support _ Self Diagnosis : Picture Teet

If the test image is proper_/displayed, the poor picture may be caused by the source or signal.

The %/image does not look as good as it If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high

did inthe store, definition) picture quality.

Cable/Satellite subscribers: Try HD channels from the channel line up.

Air/Cable Antenna connection: Try HD channels after running Auto program.

_-_ Many HD channels broadcast SD contents upscaled to HD. The picture quality of upscaled SD content is low.

Adjust the Cable/Set top box video output resolution to 108Oi or 720p.

The picture is distorted: macroblock error, • Compression of video contents may cause picture distortion, especially on fast moving pictures such as pictures from

small Mock, dots, pixeliza[ion, sports and action movies.

A weak signal can cause picture distortion. This is not a TV problem.

Mobile phones used close to the TV (within 3.3ff) may cause noise in the picture on analog and digital channels.

Color is wrong or missing. If you're using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or

loose connections may cause color problems or a blank screen.

There is poor color or brightness. * Adjust the Picture options in the TV menu. (Go to Picture Mode / Color / Brightness / Sharpness)

Adjust the Energy Saving option in the TV menu. (Go to MENU - Setup - Eco Solution - Energy Saving)

Try resetting the picture to view the default picture setting. (Go to MENU - Picture - Picture Reset)

There is a dotted line on the edge of the * If the picture size is set to Screen Fit, change it to 16:9.

screen. * Change the cable/satellite box resolution.

-9-

Sound Problem Perform the Sound Test t0 confirm your %/'s audio is working properly.

(Go to MENU _ Support - Self Diagnosis : Sound Test)

If the audie isOK, the sound problem may caused by the source er signal

There is no sound or the sound is too low at Check the volume control of the device (Cable/Sat Box, DVD, Bin-ray, etc.) connected to your TM

maximum volume.

The picture is good but there is no sound. • If you are usiog an external device, check the device's audio output option. Ex. You may need to change your cable box's

audio option if you have the cable box's audio output connected to your TV using an HDMI cable.

Reboot the connected device by unplugging and then reconnecting the device's power cable.

The speakers are making an inappropriate • Check the cable connections. Make sure a video cable is not connected to an audio input.

noise. • For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the T_

Make sure the wall outlet is working.

Try pressing the POWER button on the TV to make sure the problem is not caused by the remote.

If the TV turns on, refer to 'Remote control does not work' below.

The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.

If your PC is connected to the T_, check your PC power settings.

Make sure the AC power cord is plugged into the wall outlet and TV secured/.

When you are watching a TV connected to an antenna or to a cable connection, the TV will turn off after 10 - 15 minutes if

there is no signal.

There is no picture/video. Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

Set your external device's (Cable/Sat Box, DVD, Bin-ray etc) video outputs to match the connections to the TV input. For

example, ifan external device's output is HDMI, it should be connected to an HDMI input on the T_

Make sure your connected devices are powered on.

Be sure that the TV is set to the correct source by pressing the SOURCE button on the remote control.

Reboot the connected device by unplugging and then reconnecting the device's power cable.

RF(Cable/Antenna) Connection

The TV isnot receiviog all channels. • Make sure the coaxial cable is connected secured/.

Run Auto Program to add available channels to the channel list.

Go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in the

menu. There are 3 options. (STD, HRC, and IRC)

Verify the antenna is positioned correctly.

No Caption on digital channels. Check the Caption Setup menu. Try changing Caption Mode Servicet to CCl.

Some channels may not have caption data.

The picture is distorted: macroblock, error, • Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action

small block, dots, pixelization, movies.

A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and • Remove the left and right audio connections from the set-top-box. If the buzziog stops, this indicates that the set-top-box

buzzing noise from the %/speakers with has a grounding issue. Replace the Component video cables with an HDMI connection.

Component cable connection.

The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.

Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work. • Replace the remote control batteries. Make sure you install the new batteries with their polarity (+/-) correct.

Clean the transmission window located on the top of the remote control.

Try pointing the remote directS/at the TV from 5_6 feet away.

The cable/set top box remote control Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the

does not turn the TV on or off, or adjust SAMSUNG TV code.

the volume.

A "Mode Not Supported" message Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to resolution

appears, settings in this manual.

Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component.

Caption must be activated on the external device.

There is a plastic smell from the TV. This smell is normal and will dissipate over time.

-10-

TV Signal Strength is unavailable in the This function isonly available for digital channels received through an Antenna/RF/Coax connection.

Self Diagnosis Test menu.

TV is tilted to the right or left side. Remove the stand base from the TV and reassemble it.

The Channel menu is greyed out The Channel menu is only available when you select the TV source.

(unavailable).

Your settings are lost after 30 minutes or If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo mode

every time the TV is turned off. to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU _ Setup

Plug & Play _ ENTERS.

You have intermittent loss of audio or video. Check the cable connections and reconnect them.

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term

use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look This is part of the product_ design and is not a defect.

closely at the edge of the frame of the T_

POP {TV's internal banner ed) appears on Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

the screen.

'-_ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or

dark pixels on the screen. These pixels will have no impact on the performance of the product.

<_ You can watch detailed troubleshooting videos at www.samsung.com/spsn.

'_ Some functions and pictures shown in this manual are available on specific models only.

'-_ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com , Support). To

upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB

slot, and then select Support > Software Upgrade in the TV's menu.

and Maintenance

'_ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching the TV.

'-_ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to

prevent scratches.

Do not spray Water directly onto the _ Clean the product with a soft cloth

product. Any liquid that goes into the dampened with in a small amount of water.

product may Cause a failure, fire, or electric Do not use a flammable liquid (e.g. benzene,

shock, thinners) or a cleaning agent.

License

D| _.. DivX Certified@ to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DiVX, LLC, a subsidiary of Rovi Corporation. This is an official DiVX Certified® device that plays DivX video. Visit

divx. com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DiVX Certified® device must be registered in

order to play purchased DivX Video-on-Demand {VOD) movies. To obtain your registration code, locate the DiVX VOD section in your device setup menu. Go to vod. divx.com

for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DiVX®, DiVX

Certified® and associated Iogos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

r_q DOLBY.

1::II61TALPLt]_ I Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

@_ Manufactured under a license from U.S. Patent No's: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467,7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered

trademarks & DTS Premium Sound is a trademark of DTS, Inc.

@_ Manufactured under a license from U.S. Patent No's: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152,

5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol

Studio Sound together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc.

H_I Thet ...... HDMI and HDMI High-Definition Mu]tirnedia h_terf ...... d the HDMI LOg .... tradernark ..... gistered trademarks of HDM,

Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsuog.com) Open Source License Notice is written only English.

-11-

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsuog.com).

[] This product uses some software programs which are distributed under the Independent JPEG Group.

ICU License - ICU 1.8.1 and later

Permission is hereby granted, free of charge, to any person oMaining a copy of this software and associated documentation files (the "Software"), to deal in the Software

without restriction, including without limitation the rights to use, copy, modity, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the

Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright

notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPUED, INCLUDING BUT NOT UMITED TO THE WARRANTIES OF

MERCHANTABIUT_, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR

HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN

CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software

without prior written authorization of the copyright holder.