◀ ▶
English
●
Position: Adjusts the picture position. Position is only available if Picture size
is set to Zoom1, Zoom2, Wide Fit, or Screen fit.
To use the Position function after selecting Zoom1, Zoom2 or Wide Fit,
follow these steps:
1. Select the Position, and then press the ENTER
E
button.
2. Select the Position button, and then press ENTER
E
.
3. Press the
▲
or
▼
button to move the picture up or down.
4. Press the ENTER
E
button.
If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTER
E
. The picture will be reset to
its default position.
To Next Page
Loading...
