◀ ▶
English
■
Automatic Network Setup
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to the Network Settings screen. (MENU
m
→
Network
→
Network
Settings
→
ENTER
E
)
2. Select Wired, and then press
ENTER
E
.
3. The network connection screen
appears and verifies the network
connection. When the connection
has been verified, the "Internet
is connected successfully."
message appears.
U
Move
E
Enter
R
Return
Network Settings
Select a network connection type.
Wired
Wireless
(General)
WPS(PBC)
One Foot
Connection
Connect to the network using the LAN cable. Please make
sure that the LAN cable is connected.
To Next Page
Loading...
