◀ ▶
English
13. Repeat the entry process for each field in the IP Address.
If you make a mistake when entering a number, re-enter the number to
correct it. You can also press the up or down arrow button to change the
number one unit at a time.
14. When done entering the IP Address, press ENTER
E
.
15. Press the down arrow key to go to the Subnet Mask fields, and then press
ENTER
E
.
16. Repeat the same entry process for Subnet Mask, Gateway, and DNS
Server.
17. When done, select OK at the bottom of the page, and then press
ENTER
E
. The network connection screen appears and the verification
process starts. When the connection has been verified, the "Internet
connected successfully." message appears.
To Next Page
Loading...
