Samsung 6 series - Connecting and Preparing Your TV Checking Parts; Using the Stand-Base; Assembling the Cables

English - 4
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent
stand.
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the oor
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
N
-20° ~ 20°
Checking Parts
Owner’s Instructions Remote Control/
AAA Batteries (2ea)
Power Cord Cloth-Clean
Warranty Card/
Safety Guide Manual
(Not available in all locations)
Ferrite Core for
Power Cord
Ferrite Core for
Headphone
Ferrite Core for
Power Cord
(PS63B680T only)
Cover-Bottom
(PS50B650S only)
(Refer to page 69)
Cover-Bottom / Screws (2ea)
(PS58B680T / PS63B680T only)
(Refer to page 69)
Screw (4ea)
(PS50B650S only)
(Refer to page 69)
Holder-Ring (4ea)
(Refer to page 69)
Holder-Wire Cable Program CD
Ferrite Core
The ferrite cores are used to shield the cables from interference.When connecting a
cable, open the ferrite core and clip it around the cable near the plug.
N
Connecting and Preparing Your TV
(PS63B680T only)
BN68-02113C-Eng.indb 4 2009-04-09 오후 3:47:39