Samsung AC***MNADKH - Core Operation Steps

18 English
Installation
Take the steps presented in the following table:
Option setting Status
1 Setting SEG2, SEG3 option
Press Low Fan button
to enter SEG2 value.
Press High Fan button
to enter SEG3 value.
Each time you press the button,
will be selected in
rotation.
SEG2 SEG3
2 Setting Cool mode
Press Mode button to be changed to Cool mode in the ON status.
3 Setting SEG4, SEG5 option
Press Low Fan button
to enter SEG4 value.
Press High Fan button
to enter SEG5 value.
Each time you press the button,
will be selected in
rotation.
SEG4 SEG5
4 Setting Dry mode
Press Mode button to be changed to DRY mode in the ON status.
5 Setting SEG6, SEG8 option
Press Low Fan button
to enter SEG6 value.
Press High Fan button
to enter SEG8 value.
Each time you press the button,
will be selected in
rotation.
SEG6 SEG8
6 Setting Fan mode
Press Mode button to be changed to FAN mode in the ON status.
7 Setting SEG9, SEG10 option
Press Low Fan button
to enter SEG9 value.
Press High Fan button
to enter SEG10 value.
Each time you press the button,
will be selected in
rotation.
SEG9 SEG10
8 Setting Heat mode
Press Mode button to be changed to HEAT mode in the ON status.
Setting an indoo r unit address and installation option