Samsung AC***MNADKH - Advanced Operation; Setting On and Off Timers

20 English
Installation
Option setting Status
17 Setting SEG21, SEG22 option
Press Low Fan button
to enter SEG21 value.
Press High Fan button
to enter SEG22 value.
Each time you press the button,
will be selected in
rotation.
SEG21 SEG22
18 Setting Heat mode
Press Mode button to be changed to HEAT mode in the OFF
status.
19 Setting SEG23, SEG24 option
Press Low Fan button
to enter SEG23 value.
Press High Fan button
to enter SEG24 value.
Each time you press the button,
will be selected in
rotation.
SEG23 SEG24
3 Check whether the option values that you have set are correct by pressing the button repeatedly.
[
SEG2
,
SEG3
]
[
SEG21
,
SEG22
]
[
SEG4
,
SEG5
]
[
SEG23
,
SEG24
]
SEG24]SEG24
[
SEG6
,
SEG8
]
[
SEG9
,
SEG10
]
SEG10]SEG10
[
SEG11
,
SEG12
] [
SEG14
,
SEG15
]
[
SEG16
,
SEG17
]
SEG17]SEG17
[
SEG18
,
SEG20
]
SEG20]SEG20
4 Save the option values into the indoor unit:
Press the
button with the direction of remote control for set. For correcting option values, input the option values
twice.
5 Check whether the air conditioner operates in accordance with the option values you have set:
a Reset the indoor unit by pressing the Reset button on the indoor or outdoor unit.
b Remove the batteries from the remote control, insert them again, and then press the
button on the remote
control.
Setting an indoo r unit address and installation option