Samsung AC018BNADCH - DRAIN PUMP

Disassembly and Reassembly
3-20 Samsung Electronics
No Parts Procedure Remark
8 DRAIN PUMP 1) Remove the 3 screws fixed in COVER
FAN MOTOR. (Use +Screw Driver)
2) Remove the screw fixed in HOLDER FAN.
(Use +Screw Driver)
If the reassembly, end surface of
HOLDER FAN and surface of ASSY
CROSS FAN_L should be consistent.
3)
Separate the COVER FAN MOTOR from
the indoor unit.
4)
Remove the screw fixed in CROSS FAN.
(Use +Screw Driver)
5)
Separate the CROSS FAN from the
indoor unit.