Samsung AC018BXADCH - Case Blower & Bracket Motor Disassembly

Disassembly and Reassembly
3-52 Samsung Electronics
No Parts Procedure Remark
4 Cushion 1) Pull out the Cushion.
2) Disassemble the Seal Cushion LF.
- Unscrew 1 screws
3) Disassemble the Assy Cushion Right.
- Unscrew 1 screws
5 Case Blower &
Bracket Motor
1) Disassemble the both of Case Blower Out.
- Unscrew 4 screws
2) Disassemble the Bracket Motor.
- Unscrew 6 screws
6 Control 1) Disassemble the Case Control.
- Unscrew 2 screws