Disassembly and Reassembly
Samsung Electronics 3-115
No Parts Procedure Remark
7 Fan propeller
+ Motor
1) Take Fan Propeller apart.
2) Unscrew and remove 4 screws on
Motor to take apart Motor.
(Use + Screw Driver)
8 Ass'y bracket
motor
1) Unscrew and remove 2 screws on to
take apart Bracket Motor.
(Use + Screw Driver)
9 Belt heater 1) Detach the spring of belt heater to
remove from compressor
(Belt heater connecter is already
removed from the Control part in the
procedure 1 of No. 6.)
To Next Page
Loading...
