Disassembly and Reassembly
Samsung Electronics 3-129
No. Parts Procedure Remark
14 Compressor
* Removal of belt
heater included
1)
Remove a hex nut from the end of
Cover and separate it
(Use Hexagon Wrench, Monkey
Spanner, Hexagon Socket)
2) Separate the Felt Compressor.
3) Detach the spring of belt heater to
remove from compressor
(Belt heater connecter is already
removed from the Control part in the
procedure 1 of No. 11.)
4)
Remove the 3 hex nuts from the
bottom of Compressor like the
picture on the right side.
(Use Hexagon Wrench, Monkey
Spanner, Hexagon Socket)
To Next Page
Loading...
