Samsung AC018BXADCH - Indoor Unit Disassembly - 1 way CST (cont.)

Disassembly and Reassembly
Samsung Electronics 3-11
No Parts Procedure Remark
1
PANEL And
FILTER
12) Remove the 4 screws fixed in STEP
MOTOR and then remove the MOTOR.
(Use +Screw Driver)
13) Remove the 4 HINGE and then sepa-
rate the BLADE H.
14) Separate the SENSOR HUMIDITY.
15) Remove the 5 screws fixed in GUIDE
AIR and then remove the GUIDE AIR.
(Use +Screw Driver)
16) Separate the PLATE.