Disassembly and Reassembly
Samsung Electronics 3-13
No Parts Procedure Remark
1 PANEL
&
FILTER
(cont.)
(Continues)
6) Open the GRILLE and then raise the LINK
LEVER SWITCH (yellowish green) of left
and right in the direction of arrow and
then separate the LINK LEVER.
7) Remove the fixing screws from the COVER
DISPLAY using electric motion driver and
separate it.
8) Disconnect the connectors of remote con-
trol receiver PBA / display PBA.
[ASSY GRILLE INLET]
[ASSY PANEL FRONT]
To Next Page
Loading...
