Samsung AC018BXADCH - Display PBA Disassembly (cont.)

Disassembly and Reassembly
Samsung Electronics 3-29
No Parts Procedure Remark
3) Disconect the conector wire from the
PBA.
4 Humidity
Sensor
1) Remove the humidity sensor from the
panel.
5 Step motor 1) Unscrew 2 screws on cover motor.
(Use +Screw Driver
2) Remove 2 cover motor.
3) Remove the 2 fixed screws and
disassemble the step motor.
(Use +Screw Driver)