Samsung AC018KNZDCH/AA - Page 46

Troubleshooting
4-14 Samsung Electronics
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Use of external
temperature
sensor
Use of central
control
RESERVED
Indication and Details
Indication Details Indication Details Indication Details Indication Details
02
0 Disuse 0 Disuse
1 Use 1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Use of drain pump Use of Hot Coil Use of Heater
RESERVED
Master / Slave
Indication and Details
Indication Details
RESERVED RESERVED
Indication Details Indication Details
1
0 Disuse 0 slave
1Use
1 master
--
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAG E
Use of external
control
Setting the
output of external
control
RESERVED
Buzzer control
RESERVED
Indication and Details
Indication Details Indication Details Indication Details Indication Details
2
0 Disuse 0 Thermo on 0
Use of
buzzer
1
ON/OFF
Control
1
Operation
on
1
Non use
of buzzer
2
OFF
Control
3
WINDOW
ON/OFF
Control
Option SEG19 SEG20 SEG21 SEG22 SEG23 -
Explanation PAG E
control of a remote
controller
Heating setting
compensation
RESERVED RESERVED
-
Indication and Details
Indication Details Indication Details Indication Details -
3
0 or 1 Indoor 1 0 Disuse
-
2 Indoor 2 1 2°C
3 Indoor 3
2 5°C
4 Indoor 4
5. Press the button to save and complete the option setting.
6. Press the
button to exit to normal mode.
t Press button anytime during setup to exit without setting.
t Option code will not be applied if you don't press
button.
t Setting Installation option code is available only with a master wired remote controller.
t Setting Installation option code is available when there is one on one connection between a wired
remote controller and an indoor unit.
NOTE