Disassembly and Reassembly
Samsung Electronics 3-77
No Parts Procedure Remark
7) Loosen the COMM wire connector (CN303).
Caution
When you take off the PBA, don’t
touch the components.
Please hold the PBA both side.
8) Loosen the Motor connector(CN701).
Caution
When you separate the connector,
pull pressing the locking button.
9) Take off the main PBA from the ASS’Y
Control in.
Caution
When you take off the PBA, don’t
touch the components.
Please hold the PBA both side.
5 EVAPORATOR 1) Unfasten the screw at the right side.
(use + ScrewDriver)
To Next Page
Loading...
