To Next PageTo Next PageWhat to do if there is no communication for 2 minutes between indoor units on my Samsung Air Conditioner?
If your Samsung Air Conditioner displays a communication error for more than 2 minutes between indoor units, check the communication lines and ensure the system is properly set up and configured.
What to do if my Samsung AC024KNZDCH/AA displays an error for the outdoor, condenser, or discharge temperature sensor?
If your Samsung Air Conditioner shows an error related to the outdoor temperature sensor, condenser temperature sensor, or discharge temperature sensor, check the connections of these sensors. If they appear faulty, consider replacing them.
What to do if my Samsung AC024KNZDCH/AA Air Conditioner shows an error for the EVA-IN or EVA-OUT sensor?
If your Samsung Air Conditioner displays an error related to the EVA-IN or EVA-OUT sensor in the indoor unit (open/short), check the connections of these sensors. Replace them if necessary.
What to do if my Samsung Air Conditioner displays a room sensor error?
If your Samsung Air Conditioner displays an error related to the room sensor in the indoor unit (open/short), check the room sensor connections and replace the sensor if necessary.
General| Model | AC024KNZDCH/AA |
|---|---|
| Cooling Capacity | 24000 BTU/h |
| Refrigerant | R410A |
| Weight (Outdoor Unit) | 121.3 lbs |
| Cooling Capacity (Ton) | 2 Ton |
| Power Supply | 208/230V |
| Operating Temperature (Cooling) | 115°F |
Essential safety rules to prevent electric shock, fire, and damage during operation and repair.
Step-by-step procedures for disassembling the indoor unit of the air conditioner.
Step-by-step procedures for disassembling the outdoor unit of the air conditioner.
Guides on identifying and resolving errors indicated by indoor unit displays and LED patterns.
Provides diagnostic steps and solutions for common operational issues based on symptoms.
Instructions for configuring system settings using the wired remote controller.
Visual diagram and component list for the main circuit board of the indoor unit.
