Disassembly and Reassembly
Samsung Electronics 3-61
No Parts Procedure Remark
3
Blowing
&
Evap Part
3)
Release 2 screws and pull Bottom
Discharge Kit( ⓖ ) out.
4)
Disconect the Step Motor wire( ⓗ ) from
the conect wire . This part is right side of
the Bottom Discharge Kit( ⓖ ).
5)
Pull Bottom Discharge Kit( ⓖ ) Out from
the bottom of it.
6)
Release 3 screws and pull the Evap out
from top to bottom direction.
To Next Page
Loading...
