To Next PageTo Next PageWhat to do if there is no communication for 2 minutes between indoor units on my Samsung AC036KNZDCH/AA?
If your Samsung Air Conditioner displays a communication error for more than 2 minutes between indoor units, check the communication lines and ensure the system is properly set up and configured.
What to do if my Samsung AC036KNZDCH/AA Air Conditioner displays an error for the outdoor, condenser, or discharge temperature sensor?
If your Samsung Air Conditioner shows an error related to the outdoor temperature sensor, condenser temperature sensor, or discharge temperature sensor, check the connections of these sensors. If they appear faulty, consider replacing them.
What to do if my Samsung Air Conditioner shows an error for the EVA-IN or EVA-OUT sensor?
If your Samsung Air Conditioner displays an error related to the EVA-IN or EVA-OUT sensor in the indoor unit (open/short), check the connections of these sensors. Replace them if necessary.
What to do if my Samsung AC036KNZDCH/AA Air Conditioner displays a room sensor error?
If your Samsung Air Conditioner displays an error related to the room sensor in the indoor unit (open/short), check the room sensor connections and replace the sensor if necessary.
General| Cooling Capacity | 3.6 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Refrigerant | R410A |
| Outdoor Unit Dimensions (W x H x D) | 660 x 475 x 242 mm |
| Power Supply | 220-240V |
| Voltage | 220-240 V |
| Phase | 1 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Indoor Unit Net Weight | 9.5 kg |
| Outdoor Unit Net Weight | 28.5 kg |
Essential safety guidelines for servicing the unit, including using standard parts and securing connections.
Guidelines to prevent damage from static electricity and potential hazards during repair and measurement.
Critical safety instructions for operating and handling electrical components to prevent shock and fire.
Additional operational and safety recommendations, including handling, storage, and specific procedures like pump down.
Details on detecting and reoperating after errors, including LED displays and error indicators.
Lists error modes, contents, and types displayed on the wired remote controller for troubleshooting.
Guides users through diagnosing and resolving issues based on specific symptoms encountered.
A checklist of initial items to verify when troubleshooting operational issues.
