Samsung AC071FCADEH - Page 31

Samsung Electronics 3-9
No Parts Procedure Remark
Panel
&
Filter(A type)
6)
Press the left and right hooks on the Panel to
separate Panel from the Indoor Unit.
Panel
&
Filter (B type)
1)
Press the [Filter Reset] button on the Wireless
Remote Controller once. It will make an
induction Panel that is shown in the next
picture slide down.
2) Spin the 2 connecting levers that link both ends of
the induction Panel and gear as shown in the next
picture.
3)
Push the induction Panel forward to remove it.