What causes error E153 on a Samsung AC071MXADKH Air Conditioner?
Error code E153 on your Samsung Air Conditioner indicates an issue with the indoor unit's float switch, possibly an open or short circuit related to drain pump operation. Check the float switch (2nd detection).
What to do if my Samsung AC071MXADKH Air Conditioner wireless remote control does not operate?
If your Samsung Air Conditioner's wireless remote control isn't working, first check if the batteries are discharged and replace them with new ones. Ensure that nothing is blocking the remote control sensor. Strong light from fluorescent bulbs or neon signs may interfere with the remote control, so check for any nearby.
Why is my Samsung AC071MXADKH Air Conditioner not cool or warm enough?
If your Samsung Air Conditioner isn't cooling or warming enough, check the set temperature. In Cool mode, if the set temperature is higher than the current temperature, cool air won't come out. Press the Temperature button to set it lower (minimum 18°C). In Heat mode, if the set temperature is lower than the current temperature, warm air won't come out. Press the Temperature button to set it higher (maximum 30°C).
Why warm air does not come out of the Samsung Air Conditioner?
Warm air may not be coming out of your Samsung Air Conditioner if the outdoor unit is designed for cooling only. In this case, warm air won't come out even if you select the Heat mode. Also, ensure that the remote control supports both cooling and heating. If it doesn't, use a remote control that does.
How to troubleshoot error E198 on a Samsung AC071MXADKH?
If your Samsung Air Conditioner displays error code E198, which indicates a Thermal Fuse Open, check the indoor unit Terminal Block.
What to do for unpleasant odours permeate the room from my Samsung AC071MXADKH Air Conditioner?
If unpleasant odors are coming from your Samsung Air Conditioner, and the unit is running in a smoky area or there's a smell from outside, ventilate the room. If indoor temperature and humidity are high, operate the air conditioner in Clean or Fan mode for 1 to 2 hours. If the unit hasn't been used for a while, clean the indoor unit and operate it in Fan mode for 3 to 4 hours to dry the inside. Also, clean the air filter if it's blocked with dirt.
What to do if my Samsung Air Conditioner shows error E202?
If your Samsung Air Conditioner displays error code E202, the suggested solution is to check the electrical connection and settings between the indoor and outdoor units.
What to do if my Samsung AC071MXADKH displays error code E121?
If your Samsung Air Conditioner shows error code E121, it indicates an issue with the indoor unit's room thermistor, specifically an open or short circuit. Check the room temperature sensor of the indoor unit for shorts or opens.
How to troubleshoot error on discharge temperature sensor of compressor 1 in Samsung AC071MXADKH?
If your Samsung Air Conditioner is showing an error related to the discharge temperature sensor of compressor 1, indicating a short or open circuit, you should check the discharge sensor for any open or short conditions.
How to fix communication error between the outdoor unit and main micom on Samsung Air Conditioner?
If you encounter a communication error between the outdoor unit and the main micom on your Samsung Air Conditioner, especially on PF #4 to #6 controllers, you should check the electrical connection and setting between the indoor unit MAIN PBA and the INVERTER PBA.
Details the Slim Duct type indoor unit's features and layout.
Details the Global Duct type indoor unit's features and layout.
Details the MA Duct type indoor unit's features and layout.
Provides instructions and guidance for cleaning the air conditioner unit.
Outlines the schedule and details for regular air conditioner maintenance checks.
Specifies recommended operating temperatures and humidity for different modes.
General| AC input voltage | 220-240 V |
|---|---|
| Current (heating) | 17 A |
| AC input frequency | 50 Hz |
| Design load (cooling) | - kW |
| Energy efficiency class (cooling) | A+ |
| Annual energy consumption (cooling) | 421 kWh |
| Hourly energy consumption (cooling) | 3.95 kWh |
| Energy efficiency class (heating) (Warmer heating season) | A |
| Energy efficiency class (heating) (Average heating season) | - |
| Annual energy consumption (heating) (Average heating season) | - kWh |
| Outdoor unit noise level | 65 dB |
| Type | Air conditioner indoor unit |
| Product color | Brushed steel |
| Inverter technology | Yes |
| Refrigerating medium | R410A |
| Air conditioner functions | Cooling, Fan, Heating |
| Refrigerating medium weight | 1300 g |
| Cooling capacity in watts (nominal) | - W |
| Cooling energy efficiency (EER, W/W) | 3.3 |
| Heating energy efficiency (COP, W/W) | 3.64 |
| Operating temperature (cooling) (T-T) | -15 - 50 °C |
| Operating temperature (heating) (T-T) | -20 - 24 °C |
| Seasonal efficiency rating (cooling) (SEER) | 5.9 |
| Certification | CE |
| Indoor unit type | Ceiling |
| Indoor unit depth | 700 mm |
| Indoor unit width | 850 mm |
| Indoor unit height | 250 mm |
| Indoor unit weight | 25800 g |
| Indoor units quantity | 1 |
| Indoor unit package depth | 784 mm |
| Indoor unit package width | 1064 mm |
| Indoor unit package height | 320 mm |
| Indoor unit package weight | 30500 g |
| Fan motor type (indoor unit) | DC |
| Indoor unit sound power level | 27 dB |
| Indoor unit noise level (low speed) | 24 dB |
| Indoor unit noise level (high speed) | 30 dB |
Weight and Dimensions| Package depth | 413 mm |
|---|---|
| Package width | 1023 mm |
| Package height | 911 mm |
| Package weight | 57200 g |
To Next Page
