Samsung AC071FCADEH - Page 35

Samsung Electronics 3-13
No Parts Procedure Remark
5
Heat Exchanger 1) Undo fixing screw in the Heat Exchanger.
(Use +Screw Driver.)
2)
Separate the Indoor Unit’s Sensor from the Heat
Exchanger.
3)
Separate the Heat Exchanger from the Indoor Unit.
6 Cross Fan 1) Undo 3 fixing screws on the Cover Fan Motor.
(Use +Screw Driver.)
2)
Separate the Cover Fan Motor from the Indoor
Unit. (Use +Screw Driver.)