Samsung AC071TN4PKC - Page 19

19
English
Installation Procedure
2 Set the option values.
CAUTION
• The total number of available options are 24: SEG1 to SEG24.
• Because SEG1, SEG7, SEG13, and SEG19 are the page
options used by the previous remote control models,
the modes to set values for these options are skipped
automatically.
• Set a 2-digit value for each option pair in the following
ͱθʒʪθࡤƊkߤɇʒƊkߥƊkߦɇʒƊkߧƊkߨɇʒ
ƊkߪƊk߫ɇʒƊkߣߢƊkߣߣɇʒƊkߣߤƊkߣߦ
ɇʒƊkߣߧƊkߣߨɇʒƊkߣߩƊkߣߪɇʒƊkߤߢ
ƊkߤߣɇʒƊkߤߤƊkߤߥɇʒƊkߤߦ
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 XXXXX
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1XXXXX
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2XXXXX
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3XXXXX
On (SEG1 to SEG12) Off (SEG13 to SEG24)
Steps Remote control display
1 Set the SEG2 and SEG3 values:
a Set the SEG2 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
SEG2
b Set the SEG3 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
SEG3
When you rotate the Wheel, values appear in the following order:
2 Press the (Mode) button. Cool and On appear on the remote control display.
3 Set the SEG4 and SEG5 values:
a Set the SEG4 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
SEG4
b Set the SEG5 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
SEG5
When you rotate the Wheel, values appear in the following order: