Disassembly and Reassembly
Samsung Electronics 3-55
No Parts Procedure Remark
4 Control In ▶ The Control In should be disassembled
after disassembling the Cover Control
1-3).
1) Disassemble all Control Wires
connected to the inside of PCB.
2) In case of disassembling the PCB
separately, disassemble the PCB from
the case with pushing the hook after
unscrewing the screw.
- Unscrew 1 screw
3) In case of disassembling the Case
Control, disassemble the Case Control
from the set after unscrewing the
screw connected to the direction of
Blower.
- Disassemble if after disassembling
the Cabinet Top Motor 1-1.
To Next Page
Loading...
