Disassembly and Reassembly
Samsung Electronics 3-45
No Parts Procedure Remark
2 TRAY DRAIN 1) Loosen stepping motor wire and
detach the hook of main frame.
2) To detach TRAY-DRAIN from the main
frame, pull the bottom of the TRAY-
DRAIN towards you.
3) To detach TRAY-DRAIN from the main
frame , pull the bottom of the TRAY-
DRAIN towards you.
.3 CONTROL IN 1) Unfasten the earth screw.
(use + ScrewDriver)
2) Detach the temperature sensor and
Humidity sensor.
3) Detach the temperature sensor.
To Next Page
Loading...
