Do you have a question about the Samsung AC120RN4DKG and is the answer not in the manual?
Brand | Samsung |
---|---|
Model | AC120RN4DKG |
Category | Air Conditioner |
Language | English |
Safety measures regarding power cords, plugs, cables, outlets, and grounding to prevent electric shock.
Detailed specifications for Slim 1Way indoor and outdoor units, including performance, size, and harness.
Detailed specifications for Mini 4 way units, covering performance, size, and harness details.
Detailed specifications for 4Way CST units, including performance, size, and harness information.
Detailed specifications for 360 CST units, including performance, size, and harness information.
Detailed specifications for Console units, including performance, size, and harness information.
Detailed specifications for MSP Duct units, including performance, size, and harness details.
Detailed specifications for C-RAC units, including performance, size, and harness information.
Detailed specifications for Ceiling units, including performance, size, and harness information.
Detailed specifications for Big Ceiling units, including performance, size, and harness information.
Disassembly and reassembly steps for AC026RN1DKG and AC035RN1DKG indoor units.
Disassembly and reassembly steps for AC026RXADKG and AC035RXADKG outdoor units.
Guide for setting indoor unit address and installation options using the remote controller.
How to set indoor unit installation options based on location, covering SEG codes.
Explains how to use test run and view modes for system status information.
Troubleshooting guide for outdoor unit errors, including error codes and meanings.
Troubleshooting procedures based on specific symptoms and error codes.
Troubleshooting steps for indoor fan errors, checking motor operation and voltage.
Troubleshooting steps for indoor/outdoor communication errors, checking signals and PCBs.
Troubleshooting steps for indoor unit float sensor errors, checking water levels and drain pump.
Troubleshooting for E407 error (High Pressure Switch Error), checking connector and pressure.
Step-by-step diagnosis for outdoor unit power issues on 3-phase products.
Troubleshooting steps for indoor/outdoor communication errors (E202), checking wires and PCBs.
Troubleshooting steps for communication errors between outdoor unit INV and MAIN MICOM (E203).
Troubleshooting outdoor sensor errors (E221, E231, E251, E320), checking connections and resistance.
Troubleshooting reverse or loss phase errors (E425) in 3-phase outdoor units using a phase tester.
Troubleshooting compressor down errors (E403) due to freezing control, checking fans and sensors.
Troubleshooting outdoor unit fan errors (E458, E475), checking connectors, voltage, and PCB.
Troubleshooting compressor start/rotation errors (E461, E467), checking power and resistance.
Troubleshooting full current or PFC over-current errors (E462, E484), checking installation and valves.
Troubleshooting IPM over current errors (E464), checking installation, wiring, and service valves.
Troubleshooting DC LINK errors (E466, E483, E488), checking power, reactor, fuses, and terminal blocks.
Troubleshooting gas leakage errors (E554), checking compressor, wiring, installation, and refrigerant.
Troubleshooting pipe blockage errors (E422), checking service valves, piping, EEV, and sensors.