17
ENGLISH
PROBLEM SOLUTION
The fan speed does
not change.
Auto/Dry mode.
Timer function does
not set.
Power button on the remote control after
you have set the time.
Odors permeate in
the room during
operation.
entering from outside. Operate the air conditioner in Fan mode or
open the windows to air out the room.
The air conditioner
makes a bubbling
sound.
through the compressor. Let the air conditioner operate in a
selected mode.
Power button on the remote control, noise may
be heard from the drain pump inside the air conditioner.
Water is dripping
from the air ow
blades.
of time with the air ow blades pointed downwards. Condensation
may generate due to the dierence in temperature.
Remote control is
not working.
conditioner. Strong light which comes from uorescent bulbs or
neon signs may interrupt the electric waves.
The air conditioner
does not turn on or
o with the wired
remote control.
The wired remote
control does not
operate.
If so, turn o the unit and switch o the circuit breaker. Call your
nearest contact center.
The indicators of
the digital display
ashes.
Power button on the remote control to turn the unit o
and switch the circuit breaker o. Then, switch it on again.
Indoor unit display
indicates
"
, , "
Response signal from the power supply utility, then the compressor
indoor unit display will indicate " , , ".
To Next Page
Loading...
