What to do if my Samsung Air Conditioner shows an error on the outdoor COND OUT sensor?
If your Samsung Air Conditioner displays an error on the outdoor COND OUT sensor (short or open), it requires activities exclusively for Authorized Service Center.
Why does my Samsung AC030JXADCH Air Conditioner show a communication error between the indoor and outdoor units?
If you are getting a communication error between the indoor and outdoor units of your Samsung Air Conditioner, it might be due to a pre-tracking failure or a mismatch between the actual number of indoor units and the quantity setting on the outdoor unit. In this case, check the indoor quantity setting on the outdoor unit.
What to do if Samsung AC030JXADCH Air Conditioner shows error on outdoor temperature sensor?
If your Samsung Air Conditioner displays an error related to the outdoor temperature sensor, specifically a short or open error, you should check the outdoor sensor for an open or short circuit.
What to do if my Samsung Air Conditioner displays an error due to operation failure of inverter compressor?
If your Samsung Air Conditioner displays an error due to operation failure of inverter compressor, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC030JXADCH has Outdoor unit EEPROM Read/Write error (Option)?
If your Samsung Air Conditioner has an Outdoor unit EEPROM Read/Write error (Option), it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC030JXADCH displays an error on the discharge temperature sensor of compressor 1?
If your Samsung Air Conditioner displays an error on the discharge temperature sensor of compressor 1 (short or open), it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner displays a communication error between the outdoor unit inv and main micom?
If your Samsung Air Conditioner displays a communication error between the outdoor unit inv and main micom (specifically for PF #4~#6 controller, where the error is determined from when the compressor turns on), it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner detects compressor overload prevention?
If your Samsung Air Conditioner detects compressor overload prevention, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC030JXADCH displays PFC Overload (Over current) Error?
If your Samsung Air Conditioner displays PFC Overload (Over current) Error, it requires activities exclusively for Authorized Service Center.
How to troubleshoot error on thermal fuse of indoor unit in Samsung Air Conditioner?
If your Samsung Air Conditioner is showing an error related to the thermal fuse of the indoor unit being open, you should check the thermal fuse for an open circuit and inspect the indoor unit terminal block.
General safety guidelines for installation and operation.
Guidelines and warnings for installing the unit safely.
Safety checks for power supply, fuses, and circuit breakers.
Criteria for choosing an appropriate installation location.
Clearances for installing one outdoor unit.
Clearances for installing multiple outdoor units.
Method for securing the outdoor unit using anchor bolts.
Table of error codes and meanings for the outdoor unit.
General| Model | AC030JXADCH |
|---|---|
| Capacity (Cooling, Btu/hr) | 30, 000 |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 13.5 kg |
| Weight (Outdoor Unit) | 45 kg |
| Noise Level (Indoor) | 45 dB(A) |
| Operating Voltage | 220-240V |
| Operating Frequency | 50 Hz |
| Power Source | 220-240V/50Hz |
| Cooling Capacity (Ton) | 2.5 |
| Air Flow (Indoor) | 18.5 CMM |
| Dimensions (Indoor Unit) | 845 x 270 x 200 mm |
| Dimensions (Outdoor Unit) | 880 x 638 x 310 mm |
To Next Page