How to troubleshoot error on discharge temperature sensor of compressor 1 in Samsung Air Conditioner?
If your Samsung Air Conditioner is showing an error related to the discharge temperature sensor of compressor 1 (short or open), you should check the discharge sensor for an open or short circuit.
How to resolve communication error between outdoor unit inv and main micom on Samsung AC030JXADCH Air Conditioner?
If you encounter a communication error between the outdoor unit inverter and the main micom on your Samsung Air Conditioner, check the electrical connection and setting between the indoor unit MAIN PBA and the INVERTER PBA.
What causes error on room temperature sensor of indoor unit in Samsung AC030JXADCH Air Conditioner?
If your Samsung Air Conditioner displays an error related to the room temperature sensor of the indoor unit (short or open), the issue may be with the indoor unit's room thermistor being open or short. Check the thermistor.
What does error on EVA IN sensor of indoor unit mean for Samsung AC030JXADCH?
If your Samsung Air Conditioner shows an error on the EVA IN sensor of the indoor unit (short or open), it indicates a problem with the indoor unit's EVA_IN thermistor. Check if the thermistor is open or short.
What should I do if my Samsung AC030JXADCH Air Conditioner shows error on OLP sensor?
If your Samsung Air Conditioner is showing an error related to the OLP sensor (short or open), you should check the OLP sensor for an open or short circuit.
What to do if Samsung AC030JXADCH Air Conditioner shows error on float switch?
If your Samsung Air Conditioner displays an error related to the float switch (2nd detection), it indicates a potential issue with the indoor unit's float switch being open or short. You should also check the drain pump operation.
How to troubleshoot error on thermal fuse of indoor unit in Samsung Air Conditioner?
If your Samsung Air Conditioner is showing an error related to the thermal fuse of the indoor unit being open, you should check the thermal fuse for an open circuit and inspect the indoor unit terminal block.
What causes error due to repeated communication address in Samsung AC030JXADCH?
If your Samsung Air Conditioner shows an error due to a repeated communication address, you should check for any repeated indoor unit main addresses.
What to do if my Samsung AC030JXADCH detects a gas leak?
If your Samsung Air Conditioner detects a gas leak, it requires attention from an Authorized Service Center.
What to do if my Samsung AC030JXADCH Air Conditioner displays a communication error between the indoor and outdoor unit?
If your Samsung Air Conditioner shows a communication error between the indoor and outdoor units, whether it's due to no response after tracking, pre-tracking failure, a difference in the number of indoor units, or a communication tracking failure after the initial power supply, it requires activities exclusively for Authorized Service Center.
General safety guidelines for installation and operation.
Guidelines and warnings for installing the unit safely.
Safety checks for power supply, fuses, and circuit breakers.
Criteria for choosing an appropriate installation location.
Clearances for installing one outdoor unit.
Clearances for installing multiple outdoor units.
Method for securing the outdoor unit using anchor bolts.
Table of error codes and meanings for the outdoor unit.
General| Model | AC030JXADCH |
|---|---|
| Capacity (Cooling, Btu/hr) | 30, 000 |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 13.5 kg |
| Weight (Outdoor Unit) | 45 kg |
| Noise Level (Indoor) | 45 dB(A) |
| Operating Voltage | 220-240V |
| Operating Frequency | 50 Hz |
| Power Source | 220-240V/50Hz |
| Cooling Capacity (Ton) | 2.5 |
| Air Flow (Indoor) | 18.5 CMM |
| Dimensions (Indoor Unit) | 845 x 270 x 200 mm |
| Dimensions (Outdoor Unit) | 880 x 638 x 310 mm |
To Next Page