Need help?Do you have a question about the Samsung ADT SmartThings F-ADT-PIR-1 and is the answer not in the manual?
General| Model Number | F-ADT-PIR-1 |
|---|---|
| Device Type | Motion Sensor |
| Connectivity | Zigbee |
| Power Source | Battery |
| Batteries | 2 x AA |
| Mounting Type | Wall Mount |
| Brand | Samsung |
| Operating Temperature | 32°F to 104°F |
| Compatibility | SmartThings |
Prepare by positioning the detector and connect using the SmartThings app, scanning the QR code.
Remove the battery tab and store the QR code for future reference.
Place in high-traffic areas, avoiding obstructions, stairs, pets, and heat sources.
Understand the 30-foot range and 60° coverage in both directions for effective detection.
Select height (6.5-7.5 ft) and mounting surface (wall/corner) using bracket.
Use a screwdriver for angle adjustment or mounting tape for flat walls.
Use the detector's side button to test motion detection and adjust aim for 10 minutes.
Test by walking through the detection field and checking the Hub's status.
Follow steps involving the Tamper Switch to reset the detector if pairing fails.
Use for intrusion alerts, unexpected activity notifications, and controlling lights.
Utilize for video alerts with cameras or to turn off lights when leaving.
Works with various devices like lights, cameras, and voice assistants (Google/Alexa).
To Next Page
